ABOUT THIS VEHICLE > EXTERIOR RESIN PARTS AND RESIN CHARACTERISTICS |
| PLASTIC PROPERTIES CHART |
| Code | Material name | Heat resistant temperature limit* °C (°F) | Resistance to alcohol or gasoline | Notes |
| AAS | Acrylonitrile Acrylic Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid gasoline and organic or aromatic solvents. |
| ABS | Acrylonitrile Butadiene Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid gasoline and organic or aromatic solvents. |
| AES | Acrylonitrile Ethylene Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid gasoline and organic or aromatic solvents. |
| ASA | Acrylonitrile Styrene Acrylate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid gasoline and organic or aromatic solvents. |
| CAB | Cellulose Acetate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid gasoline and organic or aromatic solvents. |
| EVA | Ethylene Acetate | 70 (158) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid gasoline and organic or aromatic solvents. |
| E/VAC | Ethylene/ Vinyl Acetate Copolymer Resin | 70 (158) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid gasoline and organic or aromatic solvents. |
| FRP | Fiber Reinforced Plastics | 180 (356) | Alcohol and gasoline are harmless. | Avoid alkali. |
| PA | Polyamide (Nylon) | 80 (176) | Alcohol and gasoline are harmless. | Avoid battery acid. |
| PBT | Polybutylene Terephthalate | 160 (320) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PC | Polycarbonate | 120 (248) | Alcohol is harmless. | Avoid gasoline, brake fluid, wax, wax removers and organic solvents. Avoid alkali. |
| PE | Polyethylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PEI | Polyetherimide | 160 (320) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PET | Polyethylene Terephthalate | 75 (167) | Alcohol and gasoline are harmless. | Avoid dipping in water. |
| PGM | Polypropylene Glass Fiber Pulp | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PMMA | Polymethyl Methacrylate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| POM | Polyoxymethylene (Polyacetal) | 100 (212) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PP | Polypropylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPC | Polyphthlate Carbonate | 149 (300) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPE | Polyphenylene Ether | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PPF | Composite Reinforced Polypropylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPO | Modified Polyphenylene Oxide | 100 (212) | Alcohol is harmless. | Gasoline is harmless if applied only for quick wiping to remove grease. |
| PS | Polystyrene | 60 (140) | Alcohol and gasoline are harmless if applied only for short time in small amounts. | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PUR | Polyurethane | 80 (176) | Alcohol is harmless if applied only for very short time in small amounts. (e.g., quick wiping to remove grease) | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PVC | Polyvinylchloride (Vinyl) | 80 (176) | Alcohol and gasoline are harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| SAN | Styrene Acrylojirywr | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| TPE | Thermoplastic Elastomer | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| TPO | Thermoplastic Olefine | 80 (176) | Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. | Most solvents are harmless but avoid dipping in gasoline, solvents, etc. |
| TPU | Thermoplastic Polyurethane | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| TSOP | TOYOTA Super Olefine Polymer | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| UP | Unsaturated Polyester | 110 (233) | Alcohol and gasoline are harmless. | Avoid alkali. |
| THE PLASTIC BODY PARTS MATERIAL LIST |
| *1 | Front Bumper Extension Mounting Bracket (TSOP) | *2 | Front Bumper Cover (TSOP) |
| *3 | Radiator Lower Grille (PP) | *4 | Front Spoiler Cover (TPO) |
| *5 | Radiator Grille (ABS/PE/PP) | *6 | Radiator Grille Moulding (ABS) |
| *7 | Emblem (AES/PMMA,PC) | *8 | Front Bumper Extension (PP) |
| *9 | Head Light Washer Cover (ABS) | *10 | Head Light (PC/PP) |
| *11 | Cowl Top Ventilator Louver (PP) | *12 | Front Side Panel Protector (PP) |
| *13 | Outside Rear View Mirror (ABS/AES) | *14 | Side Turn Signal Light (PMMA/ASA) |
| *15 | Windshield Outside Moulding (AES/TPO) | *16 | Front Door Front Lower Frame Upper Cover (ASA) |
| *17 | Roof Drip Side Finish Moulding (TPE,PVC) | *18 | Door Outside Handle (PC/PBT) |
| *19 | Side Name Plate (ABS) | *20 | Front Bumper Extension (ABS) |
| *21 | Front Fender Name Plate (ABS) | *22 | Rocker Panel Moulding (TSOP) |
| *23 | Front Wheel Opening Extension Pad (PP) | *24 | Rear Wheel House Plate (PP) |
| *25 | Door Window Frame Moulding (ASA) | *26 | Rear Combination Light (PMMA/ASA) |
| *27 | Quarter Window Upper Moulding (ASA) | *28 | Antenna (ABS/PC) |
| *29 | Center Stop Light (PMMA/ASA) | *30 | Rear Spoiler Cover (ABS) |
| *31 | Back Door Outside Garnish (ABS/AES) | *32 | Licence Plate Light (PC) |
| *33 | Emblem (AES/PMMA) | *34 | Name Plate (ABS) |
| *35 | Rear Light (PMMA/ASA) | *36 | Reflex Reflector (PMMA/ABS) |
| *37 | Rear Bumper Cover (TSOP) | - | - |
